九游会老哥

1、 Equipment name: automatic hollow ultrafiltration mineral water equipment

2、 Specification and model: hdnuf-8000l

3、 Equipment brand: Wenzhou Haineng wzhdn

4、 Product function description:

1. Mineral water equipment technology is a membrane separation process with screening as the separation principle and pressure as the driving force. The filtration accuracy is within the range of 0.005-0.01um, which can effectively remove the particles, colloids, bacteria and macromolecule organics in the water. It can be widely used in the separation, concentration and purification of substances. The ultrafiltration process has no phase transformation, good temperature resistance, acid and alkali resistance and oxidation resistance. The ultrafiltration membrane can adapt to different water quality conditions and separation functions by adopting different formation forms, membrane materials and process design.

2. The mineral water equipment is a kind of solution separation based on the mechanical screening principle and the pressure difference between the two sides of the membrane. The operating pressure is usually 0.2mpa-0.6mpa, and the separation aperture is 1nm-0.1 μ M. it can be widely used in the separation, concentration and purification of substances. There is no phase transformation in the ultrafiltration process, and the operation at room temperature is particularly suitable for the separation of heat sensitive substances, and it has good temperature resistance, acid alkali resistance and oxidation resistance. It can be used continuously for a long time under the condition of 60 ℃ and pH 2-11. 　

3. Mechanical filter:

It is mainly used to remove rust, sediment, algae, suspended solids and other impurities in the water, reduce the turbidity of the water, make the turbidity of the water less than 0.5ntu, CODMn less than 1.5mg/l, iron content less than 0.05mg/l, SDI ≤ 5. The control valve can be used for back washing and forward washing at any time to wash off the dirt on its surface, prevent it from blocking and restore its filtering capacity.

4. Activated carbon filter:

Activated carbon has a very strong adsorption and filtration performance, and has a strong adsorption effect on residual chlorine, heterochromatic, peculiar smell, organic matters, etc. in water. As the reverse osmosis membrane is very sensitive to residual chlorine and organics, it is necessary to configure activated carbon to absorb residual chlorine and organics, so that the residual chlorine in the outlet water is ≤ 0.1mg/l, SDI ≤ 4, the first can meet the water supply requirements of the reverse osmosis membrane. Second, it can greatly improve the original taste of the source water. It can be backwashed at any time through multi-channel control valve or steam operated butterfly valve to wash away the colloid and other pollutants on its surface, prevent the surface of the activated carbon from being surrounded by impurities, prevent it from blocking, and restore its treatment capacity.

5. Security filter:

After pretreatment, a safety filter is arranged in front of the high-pressure pump to prevent the impurity particles larger than 1um from entering the high-pressure pump and damaging the high-pressure pump and reverse osmosis membrane. The PP filter element (with framework and good strength) is loose outside and tight inside, and the water is filtered from the outside to the inside, which can prolong the time when the filter element is blocked. The upper part has an exhaust valve, which can prevent air from entering the pump and damaging the pump. The lower part has a drain valve, which can discharge the retained impurities at any time.

6. Terminal filter:

The microporous membrane with absolute pore diameter of 0.22um can completely remove the microorganism and its heat source, ensure the asepsis of water supply and meet the requirements of pharmaceutical water

7. Hollow ultrafiltration device:

Ultrafiltration technology is a very mature mineral water production process in the world at present, and it is also a water treatment process with the most extensive market application and the largest scope of application. It can precisely filter bacteria, viruses and various floating substances in the water, with low working pressure, large water yield, large water flow, low cost and easy maintenance. The design of automatic flushing device can prolong its service life.

8. Ozone sterilizer:

Ozone dissolves in water, has the ability of continuous sterilization, long life, good sterilization effect, and its power consumption is small, does not pollute water quality, and has no residue. It is the most widely used sterilization method in the production of bottled or barreled purified water. Its concentration is generally 3G / ton of pure water. In the process of using ozone to sterilize, it is necessary to equip the ozone oxidation mixing tower for bundling

5. Features:

◇ automatic and manual operation / flushing of UF membrane

◇ the UF membrane can be cleaned manually in the machine

◇ automatic stop of high water level and automatic start of low water level mineral water

◇ water shortage protection and overload and overpressure protection of multi-stage high-pressure pump

◇ voltage loss, undervoltage, overcurrent, short circuit, open circuit, leakage protection

◇ the equipment is made of stainless steel, fully automatic operation, and no need for manual conduct.

Drinking natural mineral water, community direct drinking water, beverage, beer, brewing, dairy industry, natural mountain spring water treatment, etc.

1. The influent water quality is urban tap water or equivalent.

2. Technical indicators of water production:

(1) Water production flow: 8 tons / h (water temperature 25 ℃) pretreatment plus UF hollow ultrafiltration device

(2) Water production standard: in accordance with national standard a for natural mineral water (GB / T 19249-2003)

(3) In line with the national drinking water quality standard cj94-2005

(4) Conductivity ≥ 20 μ M / cm

1. The system equipment is entitled to one-year free warranty, the warranty date is calculated from the date of product acceptance, and the consumable filter material is not listed here.
2. In case of any equipment quality problem (except caused by misoperation or unforeseen factors) during the warranty period, the supplier shall repair it free of charge and replace the damaged parts.
3. After the expiration of the warranty period, only a certain material fee and appropriate technical service fee will be charged.
4. In case of system operation failure which cannot be solved by itself or by telephones, our technical maintenance personnel shall make solutions (including temporary measures) and schedule within 24 hours after receiving the written notice from the demander and report to the competent leaders of both parties.
5. After the delivery of the equipment, our company will have engineers to pay a return visit to understand the operation of the equipment and provide technical services in a timely manner. Users are welcome to ask any technical questions, and we will reply in time.

① the user shall provide detailed data of raw water test, so that our company can carry out relevant selection and arrangement calculation.
② the user shall explain the water quality requirements, use and water yield of the produced water.
③ our company has many types of pressure vessels, membranes, accessories, etc. if the user gives special instructions, we will try our best to meet the requirements.
④ our company provides installation and debugging for the designed and sold equipment and training for the user's operation personnel.
⑤ our company implements the principle of one-year equipment warranty and lifelong service for users, and establishes archives for tracking service to ensure the quality level.

If the above equipment fails to meet your requirements, please contact us, and we will make a detailed engineering plan according to your actual situation, to achieve a low-cost, high efficiency and scientific process combination, so that the water production can meet your ideal requirements.